Chapter 2 Before Accessing Aip Camera; Chapter 2-1 Configure Ip Address Using Ipscan Utility - AiP 960H Series Instruction Manual

Chapter 2 Before Accessing AiP camera

Before accessing to the AiP camera, make sure that the camera's RJ-45 network cable,
audio cable, and AiP camera's power cable are properly installed. For setup IP
address, please consult your network administrator for available IP addresses. The
default IP address of AiP camera is 192.168.0.200. User can also use default IP
address to verify AiP camera's network connection.

Chapter 2-1 Configure IP Address Using IPScan Utility

To configure IP address using IPScan utility, copy IPScan application from installation
CD to your local PC or execute IPScan software from installation CD directly. IPScan
utility can also be downloaded from our company website. To change IP address,
subnet mask, gateway, or HTTP port, please follow steps below:
 Run IPScan utility.
 Click on Refresh button. All available devices get listed in Device list box.
 Select the device item in Device list box.
 Edit or modify addresses in IP, Subnet Mask, Gateway, or HTTP Port edit box.
 Click on Apply button to configure the settings.
 Click on Refresh button to verify the settings.
Note: Make sure that IPScan is version 1.0.0.31 or above.
6