Mount: Manually mount SD card.
Un-mount: Manually un-mount SD card.
To un-mount the SD card, please click "un-mount SD Card" button. It might crash the
file system of the SD card, if a user does not un-mount the SD card properly.
Chapter 3-8 Alarm Settings
H.264 D1 video server or AiP camera's hardware alarm system contains motion
detection, alarm sensors, and one alarm/relay output. Many alarm features such as
motion/alarm email notification and FTP archiving can be found at this section.
Chapter 3-8-1 Motion/Alarm Setup
There are motion detection zones allowed in the H.264 D1 video server or AiP camera.
A user can enable the detection zones with different sensitivities ranging from 1 to 99
(highest to lowest) for motion detection. Once a suspicious motion activity gets
triggered, H.264 D1 video server or AiP camera can start to capture one JPEG
snapshot on various recording mediums.
Chapter 3-8-2 Alarm (DI) Input Detection
Alarm Notification — Enable alarm notification.
Alarm Input Mode — Normal open/normal close for detecting alarm input
Alarm Output Time — Trigger alarm output based on the dwell.
24