GE 21 Owner's Manual And Installation page 6

About the temperature controls.
About TurboCool
6
The temperature controls are preset in the factory at 5 for both the refrigerator
and freezer compartments. Allow 24 hours for the temperature to stabilize to the
preset settings.
Several adjustments may be required. Each time you adjust controls, allow 24 hours
after each adjustment for the refrigerator to reach the setting you have selected.
Setting either or both controls to 0 stops cooling in both the freezer and refrigerator
compartments, but does not shut off electrical power to the refrigerator.
Control settings will vary based on personal preferences, usage and operating
conditions and may require more than one adjustment.
NOTE: The refrigerator is shipped with protective film covering the temperature
controls. If this film was not removed during installation, remove it now.
Ambient Room Temperature Limits
This refrigerator is designed to operate in ambient temperatures specified
by its Temperature Class, which is marked on the rating plate.
Temperature Symbol
Class
Extended-
Temperate
Temperate
Subtropical
Tropical
NOTE: Internal temperature may be affected by such factors as the location of the refrigerator, ambient temperature
and frequency of door openings. Adjust temperature controls as required to compensate for these factors.
™ .
How it Works
TurboCool rapidly cools the refrigerator
compartment in order to more quickly cool
foods. Use TurboCool when adding a large amount
of food to the refrigerator compartment, putting
away foods after they have been sitting out at
room temperature or when putting away warm
leftovers. It can also be used if the refrigerator has
been without power for an extended period.
Once activated, the compressor will turn on
immediately and the fans will cycle on and off
at high speed as needed for eight hours. The
compressor will continue to run until the
refrigerator compartment cools to approximately
1°C, then it will cycle on and off to maintain this
setting. After 8 hours, or if TurboCool is pressed
Ambient Temperature
Maximum
SN 32°C
N 32°C
ST 38°C
T 43°C
again, the refrigerator compartment will return
to the original setting.
How to Use
Press TurboCool. The TurboCool indicator
light will come on.
After TurboCool is complete, the TurboCool
indicator light will go out.
NOTES:
The refrigerator temperature cannot be changed during
TurboCool.
The freezer temperature is not affected during TurboCool.
When opening the refrigerator door during TurboCool, the
fans will continue to run if they have cycled on.
Minimum
10°C
16°C
18°C
18°C