Page 1
Positioning Positioning) ) ) ) Anti-theft Tracking GT07 GT07 USER USER MANUAL MANUAL GT07 GT07 USER USER MANUAL MANUAL (Version 2.1) Please read this manual carefully before attempting installation and online activation. Pictures are for indication and illustration purposes only.
Page 2
1. 1. 1. 1. Accessories: Accessories: Accessories: Accessories: 2. 2. 2. 2. Features: Features: Features: Features: � Wide voltage input range: 9-36vDC � GPS position upload via GPRS as preset interval � Check location via SMS � Built-in vibration sensor, intelligent theft-proof �...
3.1 Red LED(power/working status) LED Status Meaning Continuously in dark state power off Slow flashing Working normally 3.2 Green LED(GSM status indicator) LED Status Meaning flashing Receive GSM signal normally Slow flashing Start GPRS Continuously in dark state No GSM signal 3.3Blue LED(GPS status indicator) LED Status Meaning...
Note: � Power off before installing or removing the SIM card. � The SIM card used should be available for GPRS 4.2 Note of installation � Covertly installation, be aware of water drops � Stay away from interference of electromagnetic signals �...
Tele-cutoff (petrol/ electricity) relay (equal to the yellow line of the relay socket). 5.3 Notes of the relay installation: GT07 is designed and matched by 12V relay. It is suitable to be installed in vehicle with 12V battery. If it is a vehicle with 24V battery, it should be matched by 24V relay.
Page 6
SOS,A,,13510905992# means to set the second number as SOS number SOS,A,,,13510905993# means to set the third number as SOS number If set successfully, there will be a SMS reply with “OK”. 6.2 Delete SOS specific number Before deleting specific number, please check its corresponding code. SMS command to the device to delete the number.
Page 7
The default GPRS sending time interval is 20s which means the device will upload positioning data to the platform server every 20s. Users can modify GPS time interval by SMS Command format: “ “ “ “ TIMER,time(seconds)# TIMER,time(seconds)# TIMER,time(seconds)# TIMER,time(seconds)# The time range is from 10-18000seconds.
SVL, SVL, M#-------setting vibration sensitivity as medium SVL, SVL, M# SVL, SVL, SVL, SVL, H# H#-------setting vibration sensitivity as high Note: users should be careful to alter parameters of vibration sensitivity, in case of making wrong vibration alarm. It is recommended that this parameters to be set up by installation dealers.
e.g.: Sensor Alarm! “about 84m near Gaoxinqi Campus of Bao’an Vocational Technology School(Southeast ), Dabao Road, Bianjian Road, Bao’an Area, Shenzhen City, Guangdong province, China” If the device can not get address for some reason, it will send a google link to the SOS numbers as below: :...
Page 10
server, at this time it is “logged off” status in platform. Please check the installation of device: Check whether the connection of power-line is correct, please do not connect it with the car control line. Check whether SIM card is installed correctly, please refer to the installation manual;...
Need help?
Do you have a question about the GT07 and is the answer not in the manual?
Questions and answers