Table of Contents
Advertisement
untrained users.
5. Maintain power tools. Check for misalignment or binding of moving
parts, breakage of parts and any other condition that may affect
the power tool's operation. If damaged, have the power tool
repaired before use. Many accidents are caused by poorly
maintained power tools.
6. Use the power tool, accessories and tool bits etc., in accordance
with these instruction and in the manner intended for the particular
type of power tool, taking into account the working condition and
the work to be performed .Use of the power tool for operations
different from intended could result in a hazardous situation.
Special safety instruction for heat gun
Overheat protection
If this product is overheating, the heater will
automatically and cool air blowing constantly to reduce waiting time
from heater restarting
CAUTION:
Never put the appliance down on its air outlet nuzzle. Always keep its
outlet nuzzle upward or put it on one of its sides to prolong the service
lifetime.
WARNING! The use of accessories or attachment, other than those
recommended in this instruction manual, may present a risk of
personal injury.
Additional safety instruction for heat guns
1. Fully unwind cable drum extensions to avoid potential overheating.
2. Avoid instant switch between power and temperature to secure
the using life of heater and switch control. Heater is consumable
accessory.
3. When an extension cable is required, you must ensure that it has
the right ampere rating for you power tool and is in safe electrical
stop heating up
7
Advertisement
Chapters
Table of Contents
