Safety Instructions - Prokit's Industries SS-611 User Manual

CAUTION: LEAD PAINT FUMES ARE VERY HARMFUL. ALWAYS
PROVIDE ADEQUATE VENTILATION WHILE WORKING INDOORS.
Other functions of the heat gun set
1. Remove paint and varnish.
2. Remove self adhesive stickers and trim.
3. Loosen rusted or over tightened nuts and metal screws.
4. Thaw frozen pipes, frozen door locks, padlocks, etc.
WARNING: DO NOT ATTEMPT TO THAW PLASTIC PIPS!
5. Pre-heat the natural wood grain of wooden surfaces before
staining or varnishing.
6. Dry paints and varnishes fast, this is especially useful when
adding several coats of the paint or varnish together.
7. Soften old putty before remove and replacement.
8. Drying wet and damaged timber before filling with compound
and refinishing.
9. Shrinking PVC shrink-wrap sheeting for packaging protection.
10. Shrinking polyvinyl wire joints.

Safety instructions

 The tool must be used only for the prescribed purpose. Any usage
other than those mentioned in this manual will be considered a
case of error operation. The user shall be liable for any damage or
injury resulted from such cases of misuse.
 To use this tool properly, you must observe the safety regulations,
the assembly instructions and the operation instructions to be
found in this Manual. Every person who use and service the
machine has to be acquainted with this manual and be informed
about its potential hazards. Children and infirm people are
prohibited to use this tool.
 Children in the working venue should be supervised at all time. It
is also imperative that you observe the accident prevention
regulations in force in your area. The same applies for general
rules of occupational health and safety.
 The manufacturer shall not be liable for any changes made to the
tool nor for any damage resulting from such changes.
WARNING! Before connecting a tool to a power source (main power
point receptacle, outlet, etc.), ensure that the voltage supply is the
4