Advertisement
Using the Function Menu:
• Press the
button
FUNCTION/SELECT
function menu.
The function menu gives you access to the many fea-
tures of your pager through a series of icons and
prompts. For example, when the function menu screen
TURN OFF
first displays, the
icon
the present position of the cursor. The
prompt also displays on the first line on the LCD. As you
move the cursor left or right across the icons, a corre-
sponding prompt appears. To activate your function
Á
selection, press
.
NOTE: To escape from any field without making any
Ë
changes, press
.
Turning Your Pager Off:
Á
• Press
to display the function menu.
ó
• The
TURN OFF
icon
flashes when this menu item
first appears.
Á
• Press
to select the
TURN OFF
again to turn your pager off.
5
Setting the Clock:
• While in the function menu, move the cursor left to the
Ñ
SET TIME
icon
by pressing the
Á
SET TIME
• Press
to display the
flashes in the hour position. The
flashing digits. This is defined by the
the display above the button.
• Advance to the desired hour by pressing
• Move the cursor to the minute field by pressing
• Repeat the process for each field hour, minute, AM/
PM/24 hr., day/month/year.
Á
• Press
to initiate the change.
If you move your cursor past the last field in the row
(far right), it automatically wraps around and appears
at the first function icon in the row (far left).
NOTE: To escape from any field without making any
Ë
changes, press
.
7
Á
to display the
ó
flashes, indicating
TURN OFF
Á
function. Press
ä
.
screen. The cursor
ä
increments the
+
icon shown on
ä
.
ã
.
Backlighting:
• To view your display in low light conditions, turn on
your pager's backlight by pressing and holding
for 1.5 seconds. If no further buttons are pressed,
the backlight automatically turns off when the dis-
play goes blank. You can also turn off the backlight
Á
by pressing and holding
for 1.5 seconds.
Locking and Unlocking Messages:
Up to 10 messages can be "locked" in memory, pre-
venting them from being replaced when your pager's
memory is full or from being deleted if the
ñ
ALL
function
is chosen.
Ë
• Press the
button
READ/RESET
• Select the message you wish to lock by using the
ä
ã
or
directional buttons.
• Press the
button
FUNCTION/SELECT
function menu.
ã
• Press
to move the cursor to the
í
.
Á
• Press the
to lock the message. The padlock icon
í
appears, indicating the message has been locked.
ì
í
To unlock
a locked
message, use the same proce-
dure outlined above.
6
Setting the Alert Pattern:
Á
• Press
to display the function menu.
ä
• Press
to move the cursor to the alert icon
Á
• Press
to display the
SET ALERT
• Move to the desired alert and press
alert change. The selected alert number flashes while
a 2 second sample of the selected alert plays through
the internal speaker.
NOTE: To escape from any field without making any
Ë
changes, press
.
Setting the Alert Mode (Silent/Audible):
Á
• Press
to display the function menu.
ã
• Press
to move the cursor to the
É
Ç
or
SILENT MODE
icon.
É
The
AUDIBLE MODE
icon
appears if the pager is in
the silent alert mode (prompting you to enter that
SILENT MODE
mode, if desired). The
if the pager is in the audible alert mode (prompting
you to enter that mode, if desired).
Á
• Press
to select the desired alert.
É
If the selected mode is
, your pager emits a short
Ç
"chirp." If the selected mode is
, and if equipped with a
vibrator, your pager vibrates.
8
Á
DELETE
.
Á
to display the
LOCK MSG
icon
È
.
screen.
Á
to initiate the
AUDIBLE MODE
Ç
icon
appears
Advertisement
