Table of Contents
Advertisement
7.2.
When Replacing the Main P.C.B.
After replacing the MAIN P.C.B., be sure to achieve adjustment.
The service software is available at "TSN Website". To download, click on "Support Information from NWBG/VDBG-AVC".
7.3.
Service Position
This Service Position is used for checking and replacing parts. Use the following Extension cables for servicing.
No.
Parts No.
1
RFKZ0494
2
RFKZ0354
3
RFKZ0418
CAUTION-1. (When servicing FLASH P.C.B.)
1. Be sure to discharge the E.capacitor on FLASH P.C.B..
Refer to "HOW TO DISCHARGE THE E.CAPACITOR ON FLASH P.C.B.".
The E.capacitor voltage is not lowered soon even if the AC Cord is unplugged or the battery is removed.
2. Be careful of the high voltage circuit on FLASH P.C.B..
3. DO NOT allow other parts to touch the high voltage circuit on FLASH P.C.B..
Table S1 Extension Cable List
Connection
FP9001 (MAIN) - CCD UNIT
FP9002 (MAIN) - LENS UNIT
PP9001 (MAIN) - PS8101 (TOP)
22
Form
45PIN 0.3FFC
37PIN 0.3FFC
30PIN B to B
Advertisement
Table of Contents
