Drain Pump - AEG Electrolux LAVAMAT 84950 Instruction Booklet

Table of Contents

Advertisement

34
Care and cleaning
2. Remove the conditioner insert from the
middle compartment.
3. Clean all parts with water.
4. Put the conditioner insert in as far as it
will go, so that it is firmly in place.
5. Clean all parts of the washing ma-
chine, especially the nozzles in the top of the washing-in chamber, with a
brush.
6. Insert the detergent dispenser drawer in the guide rails and push it in.

Drain pump

The pump should be inspected regularly and particularly if
• the machine does not empty and/or spin
• the machine makes an unusual noise during draining due to objects such as
safety pins, coins etc. blocking the pump.
Proceed as follows:
1. Disconnect the appliance.
2. If necessary wait until the water has
cooled down.
3. Open the pump door.
4. Place a container close to the pump to
collect any spillage.
5. Release the emergency emptying hose,
place it in the container and remove its
cap.

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents