AGA marvel 61HK Installation & Operation Manual page 9

the 1 ⁄ " hole in the counter top and the hole in the top
1
2
of the keg refrigerator. Mount the tower to the counter
top with the 4 screws provided.
5. Mount the regulator to the CO
use the new plastic washer you received from the gas
supply company. Note that the regulator has left hand
threads and has to be turned counterclockwise to
tighten. Tighten with the adjustable wrench or the 1
open end wrench.
6. Place a black washer in the nut on the red air line and
screw the nut on the red air line to the fitting on the keg
coupler (connection
7. Place a black washer into the stainless steel end fitting
of the clear beer line from the tower and screw onto the
90° elbow on top of the keg coupler. (connection
8. Locate the CO tank in the corner of the refrigerator as
2
shown in Figure 20 and secure with the chain.
9. Hooking up the coupler to the keg. Verify the white
handle is in the up position as shown. Line up the dog
ears on the keg neck with the opening in the coupler.
Twist the coupler clockwise ↷ until it stops. Extend the
white handle and push down to lock.
USING YOUR REFRIGERATOR
Figure 20
tank (connection
2
).
C
Chain-The chain is fastened and taped
to the top of the interior liner. Untape
it and secure CO tank in place in the
2
back right corner.
Handle in up position
)
B
⁄ "
1
8
).
A
9
Figure 21
Dog ears on keg