Toshiba Regza 40XV645U Owner's Manual page 54

Using the Expert Mode
This feature individually enables/disables the Red,
Green, and Blue components of the picture to allow for
more accurate adjustment of each color.
1
From the PICTURE menu, highlight Advanced
Picture Settings and press
8.
2 Press ... or ~ to select the
Expert Mode, and then
press
8.
3
Press'" or ~ to select either
Red, Green or Blue.
4
Press ~ or ~ to select
On.
S Press ~ to select
Color or Tint,
and then press ~ or
~
to adjust then press
Ecr
Note:
• If the Picture Mode is set to AutoView, this feature will
be grayed out.
• When the Expert Mode menu is exited, the On/Off
modes of Red, Green and Blue are no longer valid.
• It is not possible to turn off all three colors at the same
time.
Using the ClearFrame™ feature
The ClearFrame 120 Hz anti-blur technology doubles
the frame rate from 60 frames per second to 120 frames
per second, virtually eliminating motion blur without
adding flicker or reducing image brightness.
1
From the PICTURE menu, highlight Advanced
Picture Settings
and press
8.
2 Press ... or ~ to select
ClearFrame.
3 Press ~ or ~ to select
On,
then press E(!{
Note: If the Picture Mode is set to Game, this feature will
be grayed out.
54
Using the MPEG NR feature
The MPEG noise reduction feature allows you to reduce
visible interference caused by MPEG compression.
1
From the PICTURE menu, highlight Advanced
Picture Setings and press
8.
2 Press ... or ~ to select
Noise Reduction and press
@.
3
Press ... or ~ to highlight the
MPEG NR.
4
Press ~ or ~ to select either
Off, Low, Middle, or
High and press
8.
Note: If the Picture Mode is set to Game, this feature will
be grayed out.
Using the DNR feature
DNR enables you to "soften" the screen representation
of a weak signal to reduce the noise effect.
1
From the PICTURE menu, highlight Advanced
Picture Settings and press
8.
2 Press ... or ~ to select
Noise Reduction and press
@.
3 Press ... or ~ to select
DNR.
4 Press ~ or ~ to select
Low, Middle, High, Auto
or
Off
and press
8.
Note:
• If the Picture Mode is set to Game, this feature will be
grayed out.
• The differences may not always be noticeable (for the
best result use lower settings as picture quality can be
lost if the setting is too high)