Setting Channel Skip; Setting Video Input Skip; Labeling Video Input Sources - Toshiba Regza 40XV645U Owner's Manual

Setting channel skip
To prevent certain channels from being viewed,
channel positions can be skipped.
1
From the SETUP menu, highlight TV Settings and
press@.
2
Press ~ or ... to select Channel Options and press
@. The list of channels will appear.
3
Press ~ or'" to select a channel position to be
skipped and press @. A tick will appear in the box.
To remove the tick, press @ again.
Note: Skipped channels cannot be selected with
(£)
or
l:£l;
however, they can still be accessed using the number keys
on the remote control.
Setting video input skip
If you set a video input source to be skipped, it will be
skipped over when selecting the input by repeatedly
pressing~.
To turn on the skip:
1
Tune to the video input source to be skipped.
2
From the SETUP menu, highlight Manual Setting
and press @. The setting window will appear.
3
Press
~ or'" to select ~ (skip on) and press
E' t !r
To turn off the skip:
1
Select the video input that is set to skip by direct
number entry or by using
~
or ... and then press @.
2
From the SETUP menu, highlight Manual Setting
and press@. The setting window will appear.
3
Press
~ or'" to select ....... (skip off) and press
Et!r
Labeling video input sources
.-
_ . -
You can label video input sources.
1
Tune to the input you want to label.
2
From the SETUP menu, highlight Manual Setting
and press @. The setting window will appear.
3
Press ~ to move from the skip selection in order to
select a label, and
press~
or ... to put in the desired
characters and press @.
4
Repeat steps 1 through 3 for other inputs.
5
To save your settings, press @.
Note: Available characters are 0-9, A-Z, (, ), " +, -, and
I
29