Page 2
Thank you for buying this high quality appliance This handbook is designed to help you through each step of owning your new appliance, from installation to use. Please read through this handbook carefully before you start using your appliance, as we have endeavoured to answer as many questions as possible, and provide you with as much support as possible.
Index BEFORE USING THE APPLIANCE ................3 Safety Instructions ......................3 Recommendations ....................... 4 Installation and Switching On The Appliance .............. 5 Before Switching On ..................... 5 THE VARIOUS FUNCTION AND POSSIBILITIES ..........6 Thermostat Setting ....................... 6 CLEANING AND MAINTENANCE ................7 Defrosting ........................
BEFORE USING THE APPLIANCE Safety Instructions • If the model contains R600a-see name plate under refrigerant (the coolant isobutane), naturals gas that, is very environmentally friendly but also combustible. When transporting and installing the unit care must be taken to ensure that none of the refrigeration circuit components become damaged.
Recommendations Warning: Do not use mechanical devices or other means to accelerate the defrosting process, other than those recommended by the manufacturer. Do not use electrical appliances inside the food storage compartments of the appliance, unless they are of the type recommended by the manufacturer. Keep ventilation openings, in the appliance enclosure or in the built-in structure, clear of obstruction.
Warning: Do not damage the refrigerant circuit. Warning: Do not store explosive substances such as aerosol cans with a flammable propellant in this appliance. Installation and Switching On The Appliance • This appliance is connecting to 220-240V or 200-230V and 50 Hz. Please check nameneplate of appliance and be sure voltage range suitable to your mains voltage.
THE VARIOUS FUNCTION AND POSSIBILITIES Thermostat Setting • Thermostat automatically regulates the inside temperature of the refrigerator compartment and freezer compartment.By rotating the knob from position 1. to 5., colder temperatures can be obtained. • « 0 » position shows thermostat is closed and no cooling is available. •...
CLEANING AND MAINTENANCE • Disconnect unit from the power supply before cleaning. Warning: Do not clean the appliance by pouring water. • The refrigerator compartment should be cleaned periodically using a solution of bicarbonate of soda and lukewarm water. • Clean the accessories seperately with soap and water Do not clean them in the washing machine.
Replacing The Light Bulb When replacing the light of the refrigerator compartment; 1. Unplug the unit from the power supply, 2. Press the hooks on the sides of the light cover top and remove the light cover 3. Change the present light bulb with a new one of not more than 15 W. 4.
BEFORE CALLING YOUR AFTER SALES SERVICE If your refrigerator is not working properly,it may be a minor problem, therefore check the following, before calling an electrician to save time and money. What to do if your refrigerator does not operate ; Check that ;...
« 0 » position. Defrost and clean the refrigerator leaving the door open to prevent the formation of midew and smell. Technical data Supplier's name or trade mark Model / Item L50262W Type of appliance GT/N1201K The energy efficiency class Voltage...
THE PARTS OF THE APPLIANCE AND THE COMPARTMENTS This presentation is only for information about the parts of the appliance. Parts may vary according to the appliance model. 1) TOP TABLE 2) REFRIGERATOR SHELF 3) CRISPER COVER 4) CRISPER 5) LEVELING FEET 6) DOOR SHELF 7) EGG SHELF 8) REFRIGERATOR LAMP BUTTON...
Changing door position Step-1: Lie down the appliance on it’s left Step-2: Dismantle both levelling feet. side put a piece of protective material under neath appliance, i.e. card, towel, etc. Step-3: Unscrew the two screws which are Step-4: Dismantle the bottom hinge. fixing the bottom hinge.
Page 14
Step-7: Replace the bushing and bushing caps on the door as shown. Step-8: Unscrew the pin of the bottom hinge and screw it on the other hole. Step-9: Assemble the door and the bottom Step-10: Assemble both levelling feet to hinge with two screw on the left their places.
Page 15
LEC Customer Care Please keep this handbook in a safe place. Please fill in the model number and serial number in the spaces provided below as they will assist us should you need to call. 0844 815 3737 When you dial this number you will hear a recorded message and be given a number of options.
Need help?
Do you have a question about the L50262W and is the answer not in the manual?
Questions and answers