Using The Usb Floppy Disk Drive; Connecting 3 ½" Floppy Disk Drive - Toshiba Satellite L20 Series User Manual

Operating Basics
For some functions, you can tap the TouchPad instead of pressing a control
button.
Click: Tap the TouchPad once
Double-click: Tap the TouchPad twice
Drag and drop:
1. Hold down the left control button and move the cursor to drag the item
you want to move.
2. Lift your finger to drop the item where you want it.
Scroll:
Vertical: Move your finger up or down the right edge of the TouchPad.
Horizontal: Move your finger left or right along the bottom edge of the
TouchPad.

Using the USB floppy disk drive

An optional 3 ½" floppy disk drive connects to the computer's USB port. It
accommodates 1.44-megabyte or 720-kilobyte floppy disks. Refer to
Chapter 2,
Connecting 3 ½" floppy disk drive
To connect the drive, plug the floppy disk drive connector into a USB port.
Refer to the following figure.
Make sure the connector is right side up and properly aligned with the
socket. Do not try to force the connection; doing so can damage the
connecting pins.
If you connect the floppy disk drive after turning on the computer, it will take
about 10 seconds for the computer to recognize the drive. Do not
disconnect and reconnect before 10 seconds have elapsed.
4-2
The Grand Tour, for more information.
Connecting the USB floppy disk drive
User's Manual