Usb Floppy Disk Drive; External Monitor - Toshiba Satellite L20 Series User Manual

Optional Devices

USB floppy disk drive

The 3 ½" external floppy disk drive module can be connected to the USB
port. For details on connecting the 3 ½" external floppy disk drive module,
refer to Chapter 4,

External monitor

An external analog monitor can be connected to the external monitor port
on the computer. The computer supports several video modes. Refer to
Appendix B,
steps below.
1. Turn the computer off.
2. Connect the monitor to the external monitor port.
3. Turn the monitor's power on.
4. Turn the computer on.
When you turn on the power, the Windows
Logo) appears on the display device.
However, the Windows
used last time to shut down your PC, if the display device exists when you
turn on the power.
To change the display settings, press Fn+F5. If you disconnect the monitor
before you turn the computer off, be sure to press Fn+F5 to switch to the
internal display. Refer to Chapter 5,
keys to change the display setting.
7-8
Operating Basics.
Display Controller and
®
Desktop appears on a display device that you
Modes. To connect a monitor, follow the
®
Bootup screen (Windows
The Keyboard, for details on using hot
®
User's Manual