Operation; Preparing For Operation - Honeywell HW400PI Owner's Manual

Operation

Thoroughly read and understand all information provided in this
Owner's Manual before operating this power inverter.

Preparing for Operation

Power inverter produces powerful voltage that can cause death or
great physical harm.
• NEVER operate in rain or snow, set on wet surfaces, immerse in liquid,
or use in marine applications.
• NEVER place the power inverter near the vehicle's heat vent or in direct
sunlight as this prevents proper cooling of the power inverter.
• ALWAYS use the power inverter where there is adequate ventilation.
NEVER block ventilation slots.
• NEVER operate the power inverter near fumes or gases (such as the
cabin of a gasoline power boat or near propane tanks) or in an enclosed
area that contains lead-acid batteries for automotive use. This type of
battery emits explosive hydrogen gas which can be ignited by sparks.
• NEVER operate the power inverter in areas with high levels of dirt, dust,
or debris.
Care and Maintenance
The power inverter should be kept in areas that are:
• Dry - Do not allow water or other liquids to come in contact with the power
inverter.
• Ambient - Temperature should be between 32
• Ventilated - During operation leave at least a 2" clearance around the
power inverter for air flow and ensure the ventilation openings are not
obstructed.
• Clean - Avoid environments with high levels of dirt, dust, or debris.
• Secure - Keep the power inverter in a location where it will not be
dropped, exposed to direct sunlight or heating units, or placed in areas
of high humidity or dampness. Keep out of reach of children.
7 www.honeywellpowerinverters.com
WARNING
WARNING
HW400PI Power Inverter Owner's Manual
0 0 0
and 104 F (0
0
- 40 C).