Table of Contents
Advertisement
Connecting an HDMI or DVI device to the HDMI input
The HDMI input on your TV receives digital audio and uncompressed video from an HDMI-equipped device, or uncompressed
digital video from a DVI-equipped (Digital Visual Interface) device.
HDMI, the HDMI logo and
High-Definition Multimedia
Interface are trademarks or
registered trademarks of
HDMI Licensing LLC.
Note:
• This model has two HDMI
IN jacks (HDMI1 and
HDMI2) and only one
audio input mode
(HDMI1). Please check
the I/O port label on the
rear side of TV to
determine the location of
the HDMI1 jack.
72
TV Back side view
HEAD PHONE
COMPONENT
OUT
IN
DIGITAL AUDIO
PC MONITOR
OPTICAL
PC/
COMPOSITE(AV)
IN
HDMI 1
R
L
Pr
Pb
Y
AUDIO
R
L
VIDEO
HDMI 1
To PC/HDMI 1
AUDIO input
(All illustrated cables and type A connectors are not
To connect an HDMI device:
One HDMI cable per HDMI device is necessary.
• For proper operation, it is recommended that you use an HDMI cable with the HDMI logo
(
).
• HDMI cable transfers both video and audio signals. Separate analog audio cables are not
required (see illustration).
To connect a DVI device:
One HDMI-to-DVI adapter cable and one pair of standard analog audio cable per DVI device are
necessary.
• For proper operation, the length of an HDMI-to-DVI adapter cable should not exceed 9.8 ft
(3m). The recommended length is 6.6 ft (2m).
• An HDMI-to-DVI adapter cable transfers video only. Make sure to connect this cable to the
HDMI1 input on the TV. Separate analog audio cables are required (see illustration).
HDMI/DVI device setup reminders
• When turning on your electronic components, turn on the TV first and then the HDMI or DVI
device.
• When turning off your electronic components, turn off the HDMI or DVI device first and then
the TV.
Selecting HDMI input
After setting up the HDMI device, use the TV remote control to change the TV source input to
HDMI (see page 16).
Selecting the HDMI audio input source
You must choose an appropriate HDMI audio input for each connection, depending on whether
the source is equipped with an HDMI or DVI socket.
Press MENU SETUP
1
/
to select Sound menu, and then press ENTER/CH LIST
2
Press
/
to select HDMI1 Audio, and then press ENTER/CH LIST
3
Press
/
to select HDMI or DVI.
Press
Press EXIT/CANCEL
4
Note:
• For specific connection instructions, refer to the manual supplied with your HDMI device.
• To set the video output for the HDMI device, refer to the manual supplied with your HDMI
device.
HDMI cable
(HDMI type A connector)
IN
TUNER
To HDMI
input
HDMI-to-DVI adapter cable
(HDMI type A connector)
Audio cable
to display the Main Menu screen.
to return to the normal screen.
To HDMI output
HDMI
device
or
DVI
device
To DVI output
.
.
Advertisement
Table of Contents
