Table of Contents
Advertisement
5. 1 ch Surround Decoder Operations
.FILTER
This function is used to select filter frequencies
that suit the speakers that are used.
'" This function is not available for speakers whose
SPEAKER SEL setting is set to "OFF".
3-1. Touch the
[~]
key of the FI LTER item to
show the submenu.
3-2. Touch the
[~]
or
[~]
key of the FRONT HPF,
CENTER HPF, SURROUND HPF or
SUBWOOFER LPF item to adjust.
[FRONT HPF]:
This function can be set to the following four
settings: 50 Hz, 80 Hz, 120 Hz or THRGH
(through). "THRGH" is the default value.
[CENTER HPF]:
This function can be set to the following
three settings: 50 Hz, 80 Hz and 120 Hz.
"120 Hz" is the default value.
[SURROUND HPF]:
This function can be set to the following four
settings: 50 Hz, 80 Hz, 120 Hz or THRGH
(through). "THRGH" is the default value.
[SUBWOOFER LPF]:
This function can be set to the following
three settings: 50 Hz, 80 Hz and 120 Hz.
"120 Hz" is the default value .
• SPEAKER GAIN
This function sets speaker output level.
' " This function is not available for speakers whose
SPEAKER SEL setting is set to "OFF".
3-1. Touch the
[~]
key of the SPEAKER GAIN
item to show the submenu.
3-2. Touch the
[~]
or
[~]
key of the FRONT L,
CENTER, FRONT R, SURROUND R,
SURROUND Lor SUBWOOFER item to
adjust.
Each item is adjustable in the range -10 dB
to
+
10 dB in 1 dB step increments. The
default value is "0 dB".
.DELAY
This function adjusts the timing of the speakers
so that they are synchronized with front speaker
output.
", This function is not available for speakers whose
SPEAKER SEL setting is set to "OFF".
3-1 . Touch the
[~]
key of the DELAY item to show
the submenu.
3-2. Touch the
[~]
or
[~]
key of the CENTER SP
or SURROUND SP item to adjust.
[CENTER SP]:
Adjustments are made in the range from 0
ms to 5 ms. The default value is "0 ms".
[SURROUND SP]:
Adjustments are made in the range from 0
ms to 15 ms. The default value is "0 ms".
.DRC
This function sets the dynamic range
compression.
3-1. Touch the
[~]
key to display the next menu
screen.
3-2. Touch the [MAX], [STD] or [MIN] key of the
DRC item to select respective item. The
default value is "MAX".
MAX675VD
61
Advertisement
Table of Contents
