Download
Share
Print this page
  1. Manuals
  2. Brands
  3. Impex Manuals
  4. Fitness Equipment
  5. MARCY SM-600
  6. Owner's manual

Impex MARCY SM-600 Owner's Manual

Smith bench
Hide thumbs

Advertisement

Quick Links

NOTE:
Please read all instructions
carefully before using this
product
Table of Contents
Safety Notice
MARCY SMITH BENCH
Hardware Pack
SM-600
Assembly Instruction
Parts List
Warranty
Ordering Parts
Model
SM 600
Retain This
Manual for
Reference
08-18-03
OWNER'S
MANUAL
IMPEX FITNESS PRODUCTS
14777 DON JULIAN RD., CITY OF INDUSTRY, CA 91746
Tel: (800) 999-8899 Fax: (626) 961-9966
www.impex-fitness.com
info@impex-fitness.com

Advertisement

loading

Related Manuals for Impex MARCY SM-600

Summary of Contents for Impex MARCY SM-600

  • Page 1 Hardware Pack SM-600 Assembly Instruction Parts List Warranty Ordering Parts Model SM 600 Retain This Manual for Reference 08-18-03 OWNER'S MANUAL IMPEX FITNESS PRODUCTS 14777 DON JULIAN RD., CITY OF INDUSTRY, CA 91746 Tel: (800) 999-8899 Fax: (626) 961-9966 www.impex-fitness.com info@impex-fitness.com...

  • Page 2: Table Of Contents

    WARRANTY...… ORDERING PARTS... BEFORE YOU BEGIN Thank you for selecting the MARCY Smith Bench SM 600 by IMPEX FITNESS PRODUCTS. carefully before using the machine. As a manufacturer, we are committed to provide you complete customer satisfaction. If you have any questions, or find there are missing or damaged parts, we guarantee you complete satisfaction through direct assistance from our factory.

  • Page 3: Important Safety Notice

    PHYSICIAN. THIS IS ESPECIALLY IMPORTANT FOR INDIVIDUALS OVER THE AGE OF 35 OR PERSONS WITH PRE-EXISTING HEALTH PROBLEMS. INSTRUCTIONS BEFORE USING ANY FITNESS EQUIPMENT. ASSUMES NO RESPONSIBILITY FOR PERSONAL INJURY OR PROPERTY DAMAGE SUSTAINED BY OR THROUGH THE USE OF THIS PRODUCT. SAVE THESE INSTRUCTIONS. READ ALL IMPEX INC.

  • Page 4: Hardware Pack

    HARDWARE PACK...

  • Page 5: Assembly Instructions

    ASSEMBLY INSTRUCTION Tools Required Assembling the Machine: Two Adjustable Wrenches and Allen Wrenches. NOTE: It is strongly recommended two or more people assembling this machine to avoid possible injury. STEP 1 (See Diagram 1) A.) Connect the two Stabilizers (#1) by a Cross Brace (#4) in the mid-span. Align the holes and secure each end with one 6 ½”...
  • Page 6 STEP 2 (See Diagram 2) A.) Slide both a Rubber Bumper (20) and Safety Stop (#6) onto a Guide Rod (#8). B.) Slide a Sliding Bar Catch (#5) onto the Guide Rod from the top. C.) Insert the bottom of Guide Rod into the ring cap on the left Stabilizer. Insert the top of Guide Rod into the ring cap on top of the left Upright Beam.
  • Page 7 STEP 3 (See Diagram 3) A.) NOTE: Help of another person is strongly recommended for this step. Place the Lifting Sleeve (#9) in between the two Sliding Bar Catches (#5). Align the holes. Insert the Weight Bar (#10) into the Bar Catch from one end and through the Lifting Sleeve to the other Bar Catch on the opposite end.
  • Page 8 A.) Attach the rear of the Bench Main Base Frame (#27) to the Bench Rear Stabilizer (#28). Secure it with one 4 ¾” x 2” Bracket (#13), two M10 x 2 ¾” Carriage Bolts (#23), two Ø ¾” Washers (#25), and two M10 Aircraft Nuts (#24). B.) Attach the front of the Bench Main Base Frame (#27) to the Bench Front Stabilizer (#45).
  • Page 9 A.) Attach two Ø ½” Bushings (#35) to both ends of the pivot on the Backrest Incline Support (#30). B.) Place the Backrest Incline Support (#30) in between the two Backrest Supports (#29). Align the holes. Insert one M10 x 7 ¼” Allen Bolt (#39) through the holes and secure it with two Ø...
  • Page 10 A.) Place the Backrest Board (#33) onto the Backrest Supports. Secure it with four M6 x 2” Hex Bolts (#41) and Ø ½” Washers (#42). B.) Place the Seat (#34) onto the Seat Supports. Secure it with four M6 x 2” Hex Bolts (#41) and Ø...

  • Page 12: Parts List

    PARTS LIST KEY NO. DESCRIPTION Stabilizer Upright Beam Rear Support Cross Brace Sliding Bar Catch Safety Stop Safety Hook Guide Rod Lifting Sleeve Weight Bar Weight Post Bracket 6 ¼” x 2” Bracket 4 ¾” x 2” Bracket M8 x ½” Allen Screw Spring Clip 2”...

  • Page 13: Warranty

    IMPEX. IMPEX is not responsible or liable for indirect, special or consequential damages arising out of or in connection with the use or performance of the product or other damages with respect to any economic loss, loss of property, loss of revenues or profits, loss of enjoyments or use, costs of removal, installation or other consequential damages or whatsoever natures.