Multi-Purpose Bench Assembly Instructions - Impex PWR 8 Owner's Manual

MULTI-PURPOSE BENCH ASSEMBLY INSTRUCTION
Tools Required Assembling the Machine: Two Adjustable Wrenches and Allen
Wrenches. NOTE: It is strongly recommended this machine be assembled by two or
more people to avoid possible injury.
STEP 1 (See Diagram 1)
A.) Attach the Main Frame (#1) to the Front & Rear Stabilizers (#2 & 3). Secure each end with
two M10 x ¾" Allen Bolts (#35) and
hole underneath the Main Frame.
B.) Slide the Sliding Block (#8) onto the Incline Adjustment Bar (#9). Align the hole then
secure it with a Lock Knob (#23) to hold the Sliding Block in position.
C.) Attach the Incline Adjustment Bar (#9) to the brackets on the Main Frame. Secure each
end with one M10 x 2 ½" Carriage Bolt (#34),
(#43).
¾" Washers (#41). Attach a Lock Knob (#23) to the
¾" Washer (#41), and M10 Aircraft Nut
17
DIAGRAM 1