Table of Contents
Advertisement
STEP 4 (See Diagram 4)
A.) Attach two Diagonal Support Frames (#7) to the Front Base Frame (#3). Secure it with
one M10 x 3" Carriage Bolt (#77),
B.) Secure the two Diagonal Supports to the Seat Support Frame (#6) with one M10 x 3"
Carriage Bolt (#77),
C.) Attach the Leg Developer (#8) to the top of the Diagonal Support Frames (#7). Secure
it with one M10 x 3" Allen Bolt (#74), two
Nut (#89). Do not over tighten the Bolt. Make sure the Leg Developer is able to swivel.
D.) Attach the Front Press Base (#10) to the Upper Frame (#4). Align the holes and insert
the Front Press Base Axle (#31). Secure it with two M10 x ½" Allen Bolts (#85).
¾" Washer (#87), and M10 Aircraft Nut (#89).
¾" Washer (#87), and M10 Aircraft Nut (#89).
¾" Washers (#87), and one M10 Aircraft
10
DIAGRAM 4
Hide quick links:
Advertisement
Table of Contents
