Table of Contents
Advertisement
3 Service Navigation
3.1.
Introduction
This service manual contains technical information, which will allow service personnel's to understand and service this model.
Please place orders using the parts list and not the drawing reference numbers.
If the circuit is changed or modified, the information will be followed by service manual to be controlled with original service manual.
3.2.
Service Navigation
About lens block
3.2.1.
The image sensor (CMOS) unit which are connected to the lens unit with 3 screws. 2 of these 3 screws are locked with the screw
locking glue, after performing the Optical tilt adjustment. During servicing, if one of CMOS fixing screws are loosened, the Optical tilt
adjustment must be performed.(About the Optical tilt adjustment, refer to the "10.3.2 Adjustment Specifications" for details.)
NOTE:
It is necessary to use the "DSC_Tilt" software to allow the "Optical tilt adjustment".
he Adjustment software "DSC_Tilt" is available at "TSN Website". To download, click on "Support Information from NWBG/
VDBG-AVC".
8
Advertisement
Table of Contents
