Samsung Refrigerator User Manual page 13

Hide thumbs Also See for Refrigerator:
Table of Contents

Advertisement

Available languages

Available languages

Close Main
Close Main
Water pipe
Water pipe
Close Main
Close Main
Water pipe
Water pipe
4.
After connecting the water supply to the water
fi lter, turn your main water supply back on and
dispense about 1l to clear and prime the water
fi lter.
Connecting the water line to the
refrigerator
1.
Remove the dust cap from the water line on the
rear of the unit and fi t a compression nut from
the install kit.
2.
Remove the water pipe from the install kit and
fi t a compression nut to one end.
3.
Join the two pipes together using the
compression joint from the install kit ensuring
that the joint is water tight.
4.
Join the other end of the install pipe to the main
water supply and turn on the water to check for
leaks.
Remove
Remove
Loosen a
Loosen a
cap
cap
Water Line from
Water Line from
unit
unit
Water Line from
Water Line from
Kit
Kit
Only connect the water line to a drinkable
water source.
If you have to repair or disassemble the
water line, cut off 6.5 mm of the plastic
tubing to make sure you get a snug, leak-
free connection.
Before being used, the leakage in these
places should be examined
CAUTION
No gap
No gap
No gap
No gap
Samsung Warranty does not cover WATER
LINE INSTALLATION.
The cost of connection to a water supply is at
the customer expense, unless included in the
delivery charge (refer to the delivery agreement
with the seller)
Please contact Plumber or Authorised Installer
for the installation if needed.
If Water leakage occurs due to improper
installation, Please contact installer.
INSTALLING THE WATER
DISPENSER LINE
For Exterior model
Parts for water line Installation
Water line fi xer and screws
Water line fi xer and screws
Purifi er lock-clip
Purifi er lock-clip
Water line
Water line
Connecting to the water supply line
Connect the water pipe with coupler and tap.
1.
Close the main water tap.
2.
Connect coupler "A" to the tap.
CAUTION
The water line must be connected to the cold water
pipe. If it is connected to the hot water pipe, it may
cause the purifi er to malfunction.
Pipe connector
Pipe connector
Purifi er
Purifi er
setting up _13

Advertisement

Table of Contents
loading

Table of Contents