Scrolling Message; Canceling Scrolling Message; Clearing Display Of Random Digits - Amana Menumaster CSNAC8 Series Owner's Manual

Commercial microwave oven
Table of Contents

Advertisement

Scrolling Message (6,1,5)

Program messages to display when oven is idle or during
cook cycles more than 20 seconds long. Messages that
display during cook cycles alternate each cooking cycle.
1. Open oven door. Leave door open.
2. Press 6,1, and 5 pad to enter scroll programming
mode.
3. Close oven door. Five characters display.
Character
Location
00 A 5E
Down
Current
Across
Lettter
Determine where message begins. See table below.
• Idle message begins at 0,0
and ends at 4,F.
• First cook message begins at 5,0
and ends at 6,F.
• Second cook message begins at 7,0
and ends at 8,F.
• Third cook message begins at 9,0
and ends at A,F.
• Fourth cook message begins at B,0
and ends at C,F.
• Fifth cook message begins at D,0
and ends at E,F.
0
1
2
3
4
5
6
0
1
2
3
4
5
6
7
8
9
A
B
C
D
E
4. Set location of first letter.
a. Press pad 3 to advance horizontally to
desired column for character location.
b. Press pad 4 to advance vertically to
desired row location.
Letter Code
7
8
9
A
B
C
D
E
F
5. Select letter.
a. Press 1 pad to advance current letter or number.
b. Press 2 pad to advance 8 characters at a time.
Letters scroll in the following order:
Blank Space
6. Press 3 pad to advance to next character location.
7. Repeat steps 5 and 6 to enter remaining characters
into message.
8. Press 3 pad after message is entered. If "5E"
displays as letter code, message is complete
If "5E" does not display as letter code, advance
letters until "5E" displays.
9. Open and close oven door to exit scroll programming
mode.

Canceling Scrolling message

1. Follow steps 1-4 in Scrolling Message section.
2. Set coordinates to first letter of message.
3. Advance letters until "5E" displays as letter code.
4. Open and close oven door to exit scroll programming
mode.

Clearing Display of Random Digits

If incorrect numbers are pressed during programming
mode, random digits and letters may display during
cooking and standby periods. To clear display:
1. Open oven door.
2. Press 6 , 1 , and 5 pad.
3. Close oven door.
4. Press 1 pad until "5E" displays.
5. Open and close oven door to exit.
8
"5E" location

Advertisement

Table of Contents
loading

This manual is also suitable for:

Menumaster snac8 series

Table of Contents