Sound Test Program; Sound (Standard) Test; Sound (Legacy) Test - Toshiba QOSMIO F20 Maintenance Manual

3.30 Sound Test program

3 Tests and Diagnostics
3.30 Sound Test program
This section describes how to perform the Sound test. To execute the sound test, refer to the
following description.
Insert the test program disk for Sound test in the USB floppy disk drive and turn on the power. The
following message will appear:
#################################################################
###### WSS, Sound blaster pro Diagnostics program ######
#################################################################
*
* 1 ............
*
* 2 ............
*
* 3 ............
*
* 4 ............
*
* ---It outputs at the speaker and lineout---
*
*****************************************************************
.... Press test number[1-4] ?
Input the test number and press Enter.
3.30.1 Sound (Standard)
To execute the Sound (Standard) test, press 1 and Enter. The following menu will appear in the
display.
#################################################################
###### ICH4-M + AD1981A
#################################################################
*
* 1 ............
* 2 ............
* 3 ............
*
* 9 ............
*
*****************************************************************
.... Press test number[1-3,9] ?
QOSMIO F20 Maintenance Manual (960-526)
Sound (Standard)
Sound (Legacy)
CD Sound (Standard)
CD Sound (Legacy)
Diagnostics program
Microphone recording & play
Sine wave
Line IN recording & play
Exit to Main
3 Tests and Diagnostics
*
[CONFIDENTIAL]
*
*
*
*
*
*
*
*
*
*
*
######
*
*
*
*
*
*
3-85