Mounting On A Wall - LG 29WR30MR Owner's Manual

8
ASSEMBLING AND PREPARING

Mounting on a wall

For proper ventilation, allow a clearance of 10
cm on each side and from the wall. Detailed
installation instructions are available from your
dealer, see the optional Tilt Wall Mounting Bracket
Installation and Setup Guide.
10 cm
10 cm
10 cm
To install the monitor to a wall, attach a wall mount-
ing bracket (optional) to the back of the monitor.
Make sure that the wall mounting bracket is securely
fixed to the monitor and to the wall.
1 Use the screws and wall mounting bracket that
comply with the VESA standard.
2 Screws which are longer than the standard
length may damage the inside of the monitor.
3 A non-VESA standard screw may damage the
product and cause the monitor to fall. LG Elec-
tronics is not liable for any accidents relating to
the use of non-standard screws.
4 The monitor is VESA standard compliant.
5 Use it according to the VESA standard as speci-
fied below.
784.8 mm or less
y
* Fastening screw: Diameter 4.0 mm x Pitch 0.7
mm x Length 10 mm
CAUTION
Unplug the power cord before moving or in-
y
stalling the monitor to avoid electric shocks.
Installing the monitor on the ceiling or on a
y
slanted wall may result in the monitor falling
off, which could lead to injury. Please use
the genuine LG wall mounting bracket. For
more information, contact your local retail
store or a qualified installer.
Applying excessive force when fastening
y
screws may cause damage to the moni-
tor. Damage caused in this way will not be
covered by the product warranty.
Use the wall mounting bracket and screws
y
10 cm
that conform to the VESA standard. Dam-
age caused by the use or misuse of inap-
10 cm
propriate components will not be covered
by the product warranty.
Installing a monitor lengthwise may damage
y
the pixels on the screen.
To prevent injury, this apparatus must be
y
securely attached to the wall in accordance
with the installation instructions. (This only
pertains to Australia and New Zealand.)
CAUTION
Installing a monitor lengthwise may damage
y
the pixels on the screen.
NOTE
The wall mount kit includes the installation
y
guide and all necessary parts.
The wall mounting bracket is optional. The
y
accessories can be purchased at your local
retail store.
The length of the screw may differ for each
y
wall mounting bracket. Ensure the correct
length screw is used.
For more information, please refer to the
y
user manual for the wall mounting bracket.