Table of Contents
Advertisement
38
CONTROLLING THE MULTIPLE PRODUCT
01. Power (Command: k a)
* Controls switching the set on/off.
Transmission
[k][a][ ][Set ID][ ][Data][Cr]
Data 00: Power off
01: Power on
Acknowledgement
[a][ ][Set ID][ ][OK/NG][Data][x]
* Shows the status of power on/off.
Transmission
[k][a][ ][Set ID][ ][FF][Cr]
Acknowledgement
[a][ ][Set ID][ ][OK][Data][x]
Data 00: Power off
01: Power on
02. Input Select (Command: x b)
* Selects an input signal.
Transmission
[x][b][ ][Set ID][ ][Data][Cr]
Data 70: DVI-D (PC)
90: HDMI (DTV)
A0: HDMI (PC)
D0: Display Port (PC)
Acknowledgement
[b][ ][Set ID][ ][OK/NG][Data][x]
* This feature may not be available depending on
your model.
03. Ratio (Command: k c)
* Adjusts the aspect ratio.
Transmission
[k][c][ ][Set ID][ ][Data][Cr]
Data 02: Wide Screen (16:9)
09: Original
10: Cinema Zoom 1
11: Cinema Zoom 2
0A: 1:1 screen
Acknowledgement
[c][ ][Set ID][ ][OK/NG][Data][x]
04. Picture Mode (Command: d x)
* Selects a picture mode.
Transmission
[d][x][ ][Set ID][ ][Data][Cr]
DVI, DP, HDMI input in PC MODE
Data 00: Picture
01: Document
02: Game
05: Custom
06: Cinema
HDMI input in AV MODE
00: Vivid 1
01: Standard
02: Cinema
05: Custom
06: Vivid 2
Acknowledgement
[x][ ][Set ID][ ][OK/NG][Data][x]
05. Contrast (Command: k g)
* Adjusts the screen contrast.
Transmission
[k][g][ ][Set ID][ ][Data][Cr]
Data 00-64: Contrast 0-100
Acknowledgement
[g][ ][Set ID][ ][OK/NG][Data][x]
06. Brightness (Command: k h)
* Adjusts the screen brightness.
Transmission
[k][h][ ][Set ID][ ][Data][Cr]
Data 00-64: Brightness 0-100
Acknowledgement
[h][ ][Set ID][ ][OK/NG][Data][x]
Advertisement
Table of Contents
