To delete a call record from system memory
♦
With a call record displayed, press the [USD] key
To make a call by automatically dialing the Caller ID number
♦
Display a call record
♦
Press the [USAS] key, [USAT] + trunk group number or [USATn] key a second time, or
♦
Press [FLT], [OPT], or [COL]
To add digits to the displayed number before calling out
♦
Display a call record
♦
Dial the additional digits to be added to the outgoing number (the added digits do not
appear on the display when entered)
♦
Press the [USAS] key, [USAT] + trunk group number or [USATn] key a second time
or
♦
Press [FLT], [OPT], or [OPT]
Answering Machine Emulation (Voice Mail
Monitor)
Station users may monitor voice mail messages as they are recorded. During recording
monitor, the station user may select to initiate a conversation with the caller. You may acti-
vate or deactivate this feature from your extension.
To begin Voice Mail Monitor
When a call is answered by voice mail at an idle station, you will hear a monitor tone.
♦
The [Voice Mail Monitor] key red LED will begin to flash
♦
Press the [Voice Mail Monitor] key
♦
When the [Voice Mail Monitor] key green LED lights, you will hear the caller's message
as it is recorded.
♦
Press the [Voice Mail Monitor] key a second time to begin talking to the caller.
or
♦
Press [SPKR] or hang up to end voice mail monitoring. The caller's message will be
saved to your voice mailbox.
To Activate / Deactivate or Change the Voice Mail Monitor Mode:
♦
While your station is idle, press [SPKR]
♦
Press [FEAT]
♦
Press the [Voice Mail Monitor] key
♦
Press
to deactivate / activate Voice Mail Monitoring.