ABRIVO X-EO Quick Reference Manual page 13

Set Follow Me Destination
♦
Lift the receiver (handset)
♦
Press [FWD] + [FWD]
♦
Enter the Call Type you wish to forward
1 = All calls (CO/Intercom)
2 = CO calls only
3 = Intercom calls only
♦
Enter the extension number of the originating forwarding station
Hold/Quick Forward Operation
♦
If your phone is equipped with this feature, pressing [HOLD/DND] will automatically for-
ward all incoming calls to you fixed call forward destination.
Master Hunt Groups
X-EO allows extensions to be programmed into Hunt Groups. Each Hunt Group is assigned
code and when dialed the system searches for the first idle extension.
To Call a Hunt Group
♦
Lift the receiver
♦
Wait for the dial tone
♦
Dial Hunt Group access code
or
♦
Press [HUNT] if assigned as a Multipurpose button
Message Waiting
To Leave a Message
When the extension you are calling is busy or does not answer
♦
Do not hang up
♦
Press the [MESSAGE] button and
♦
After you hear a confirmation tone, hang up
The [MESSAGE] button lamp will stay lit at the called extension.
To Cancel Message Waiting
If you want to cancel a message you left at an extension
♦
Lift the receiver
♦
Press the [MESSAGE] button and
dial the extension number
♦
After you hear a confirmation tone, hang up
The [MESSAGE] button lamp will go out at the extension.
Note: This feature is not available if the [MBOX] key is used for voicemail access.
then