Advertisement

Quick Links

A Division of Snow Joe, LLC
IMPORTANT!

Safety Instructions

All Operators Must Read These
Instructions Before Use
Any electrical appliance can be dangerous if used incorrectly.
Some of the safety precautions given in this manual apply
generally to many appliances. Other warnings are specific to
the use of this snow thrower.
General Safety WARNINGS!
You and any other operator of this snow thrower must read,
understand and follow these instructions in their entirety, and
should re-read them at the start of each snow season. Failure
to follow any instruction may result in BODILY INJURY (including
electric shock) or possible FIRE.
Notice the personal safety alert symbol m used in this
manual to draw your attention to a WARNING given
along with the particular operating instruction. This
means that an operation requires special ATTENTION,
CAUTION, and AWARENESS.
1. Keep children, pets, and others away from the work
area: Be aware that the normal noise of the machine
when turned on may make it difficult for you to hear
approaching people.
2. Use the electric cord and extension cord safely:
A. Keep cord away from heat sources and sharp objects.
B. Prevent oil or other fluids from spilling onto snow thrower
or cord.
C. Never carry the snow thrower by cord or yank it to
disconnect from electrical outlet. Keep cord away
from heat, oil, and sharp edges.
D. Replace or properly repair damaged cords. If cord is
damaged in any manner while plugged in, pull extension
cord from wall receptacle.
E. Extension Cord: WARNING – Only use a UL rated
extension cord for OUTDOOR, all-weather use (usually
orange color). To prevent the disconnection of the
snow thrower from the extension cord during operation,
make a knot as shown on page 5; see WARNING box
on page 5 for more cord information.
3. Wear proper clothing: Wearing rubber boots offers
additional protection from electric shock when operating
this snow thrower. Do not wear loose clothing that may
become caught in the machine.
4. Moving parts present risks: Keep hands away from
moving parts. Guards must be properly placed to protect
© 2010 by Snow Joe, LLC
All rights reserved. Original instructions.

Snow Thrower

Snow Thrower
Model No. 322P
operator. Shut off and disconnect cord before touching
any parts other than the handles and switch.
5. Hand-held operating position: Operating this snow
thrower in the hand held position is unsafe.
6. Surfaces: This snow thrower is intended for use on paved
surfaces. The unit should not be used on gravel or
stone surfaces.
7. Unintentional operation: Do not carry plugged-in
snow thrower with finger on switch. Be sure that the
switch is off when plugging in.
8. Body position: Be aware of your footing and body
positioning to maintain proper balance at all times; watch
for uneven surfaces and don!t overreach.
9. Excessive force: The snow thrower was designed to
respond at a certain rate for various snow conditions for
optimum safety and performance. Don!t force it; keep
pressure constant.
10. Hitting an object: If the snow thrower accidentally
strikes an object, first stop; remove key then plug.
Inspect for damage; repair or replace part before using
the snow thrower again.
11. When work is completed: Disconnect from the power
source when not in use, when changing accessories, and
before performing any maintenance function.
12. Store safely: Store indoors in a dry area between uses.
Store in a locked area, where children and unauthorized
people cannot gain access.
13. Maintain for safety and longevity: See instructions in
this operator!s manual for proper maintenance. Use only
those replacement parts made for your model.
14. The use of any other accessory or attachment might
increase the risk of injury.
Save These Instructions
1
Form No. 7322P-880E
OPERATOR'S MANUAL

Advertisement

Table of Contents
loading

Summary of Contents for SNOWJOE 322P

  • Page 1: Snow Thrower

    Snow Thrower Snow Thrower Form No. 7322P-880E Model No. 322P OPERATOR’S MANUAL A Division of Snow Joe, LLC IMPORTANT! operator. Shut off and disconnect cord before touching any parts other than the handles and switch. Safety Instructions 5. Hand-held operating position: Operating this snow thrower in the hand held position is unsafe.
  • Page 2: Safety And Instruction Decals

    Manuel de rechange disponible sur envoi du numéro de modèle et du numéro de série à : CERTIFIÉ POUR CAN/CSA Fabriqué en Chine Snow Joe, LLC, 86 Executive Avenue, Edison, NJ 08817, ou visiter le site www.snowjoe.com STANDARD C22.2 NO. 147-M90 322P-2138...
  • Page 3 Inspect wiring, which, if damaged during shipping, may cause serious bodily injury during equipment use. If any damage is seen or suspected, do not assemble. Instead, contact Snow Joe customer service (1-866-SNOWJOE) for assistance. Handle with care during assembly so that electrical wiring does not become damaged.
  • Page 4 Figure 4. (Readjust for each subsequent operator.) 3. Push the coupled connectors back into the motor compartment. 4. With the Snow Joe decal on the handle support (H) facing you, line up the grooves in the handle support (H) with the grooves in the power base, and slide together until interlocked (Figure 5-3).
  • Page 5: Operation

    Operation To prevent the snow thrower cord and extension cord from disconnecting during use, tie the extension cord into a loose knot around the lower bar (K) of the handle as shown in next NOTE: It is best to remove snow before it becomes packed step (Figure 7, Item O).
  • Page 6: Maintenance

    Maintenance Operating Procedures 1. Turn on the snow thrower switch: With key inserted, squeeze on/off switch to power on. Position the appliance WARNING so that the blade makes level contact with the ground, by titling it slightly forward (away from you). When starting in deep snow, see suggestion below.
  • Page 7: Service And Support

    C. Bolt Service and Support D. Flat washer E. Flat washer If your Snow Joe 322P electric snow thrower requires service F. Nut or maintenance, please call 1-866-SNOWJOE for assistance. Model and Serial Numbers 3. Pull out the rotor starting at the left side (Figure 10).
  • Page 8 1-866-766-9563 Snow Joe, LLC may from time to time change the design of its products. Nothing contained in this warranty shall be construed as obligating Snow Joe, LLC to incorporate such design changes into previously manufactured products, nor shall such changes be construed as an admission that previous designs were defective.

Table of Contents