This device complies with part 15 of the FCC rules. Operation is subject to the
1. This device may not cause harmful interference.
2. This device must accept any interference received, including interference
that may cause undesired operation.
Changes or modifications not expressly approved by the party responsible for
compliance could void the user's authority to operate the equipment.
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed
to provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses, and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may
cause harmful interference to radio communication. However, there is no guar-
antee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television recep-
tion, which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet or a circuit different from the one
where the receiver is connected.
Consult the dealer or an experienced ratio-TV technician for help.
FCC ID: CGGATS1190-1192.
Toll-free: 888.GESECURity (888.437.3287 in the US, including Alaska and Hawaii; Puerto Rico; Canada).
Outside the toll-free area: Contact your local dealer.
80 mA maximum
9 to 14 VDC
32 to 120°F (0 to 49°C)
UL 294 Standard for Access Control System
UL 365 Standard for Police Station
Connected Burglar Alarm Units and Systems
UL 609 Standard for Local Burglar Alarm
Units and Systems
UL1610 Standard for Central Station Burglar
UL 1635 Standard for Digital Alarm Commu-
nicator System Units