Impex Marcy SB-685 Owner's Manual page 8

STEP 3 (See Diagram 3)
A.) Place the Seat Pad (#10) onto the two Seat Brackets (#6). Secure it with four M8 x 1 5/8" Allen
Bolts (#25) and four Ø 5/8" Washers (#32).
B.) Attach the Backrest Board (#9) to the two Backrest Supports (#7). Secure it with four M8 x 1
5/8" Allen Bolts (#25) and four Ø 5/8" Washers (#32).
C.) When adjusting the Backrest Board to an incline position, simply pull up the Board. When
adjusting the Board to a decline position, press or step down on the Backrest Adjustment Lever
(#8) to disengage the Lever to allow the Board to go down.
7
DIAGRAM 3