NOTE: Please read all instructions carefully before using this product Table of Content ® MARCY Multi Purpose Bench Safety Notice SB-222 Hardware Identifier Assembly Instruction Parts List Warranty Ordering Parts Model SB-222 Retain This Manual for Reference 06-06-07 OWNER'S ®...
Page 2
ORDERING PARTS..................… BEFORE YOU BEGIN ® Thank you for selecting the MARCY SB-222 Multi-Purpose Bench by IMPEX Inc. For your safety and benefit, read this manual carefully before using the machine. As a manufacturer, we are committed to provide you complete customer satisfaction.
PRECAUTIONS This exercise machine is built for optimum safety. However, certain precautions apply whenever you operate a piece of exercise equipment. Be sure to read the entire manual before you assemble or operate your machine. In particular, note the following safety precautions: 1.
The Warning Label shown here has been placed on the Rear Base. If the label is missing or illegible, please call customer service at 1-800-999-8899 for replacement. Apply the label in the location shown. HARDWARE PACK NOTE: The following parts are not drawn to scale. Please use your own ruler to measure the size.
ASSEMBLY INSTRUCTION Tools Required Assembling the Machine: Adjustable Wrench and Allen Wrench...
Page 6
NOTE: It is strongly recommended two or more people assembling this machine to avoid possible injuries. STEP 1 (See Diagram 1) A.) Push the two Front Stabilizer End Caps (#13) and two Rear Stabilizer End Caps (#12) onto the Front Stabilizer (#1) and the Rear Stabilizer (#2) from both ends. B.) Attach a U-shaped Sleeve (#17) onto the bracket on the Front Stabilizer (#1).
Page 7
A.) Attach the Incline Support (#6) in between the two Backrest Supports (#5). B.) Attach the Pivot of the Backrest Supports (#5) to the Pivot on the Main Frame (#3). Secure them with one M12 x 6 7/8” Hex Bolt (#27) and M12 Aircraft Nut (#30). DIAGRAM 2...
Page 8
STEP 3 (See Diagram3) A.) Place the Seat (#10) onto the Main Frame (#3). Secure it to the two L-shaped Brackets (#9) with two M8 x 5/8” Allen Bolts (#23) and Ø 5/8” Washers (#28). Secure the Seat to the Main Frame with one M8 x 1 ¾”...
Parts list KEY NO. DESCRIPTION Q’ty Front Stabilizer Rear Stabilizer Main Frame Front Vertical Frame Backrest Support Incline Support Cross Tube Foam Tube L-shaped Bracket Seat Backrest Board Rear Stabilizer End Cap Front Stabilizer End Cap Vinyl Foam Roll Foam Grip Lock Knob U-shaped Sleeve Ø...
® IMPEX INC. LIMITED WARRANTY ® IMPEX Inc. ("IMPEX ") warrants this product to be free from defects in workmanship and material, under normal use and service conditions, for a period of two years on the Frame from the date of purchase. This warranty extends only to the original purchaser. IMPEX's obligation under this Warranty is limited to replacing or repairing, at IMPEX's option.