Samson Graphite 49 Owner's Manual page 14

Display Features
Status Indicators
Local: This sign will appear when the Local function is engaged.
Mute: This sign will appear when the Mute function is engaged.
Drawbar: This sign will appear when the polarity of the slider is inverted and engaged.
Reset: This sign will appear when the Preset Reset function is executed.
Button Indicators
F1–F16: When a function button is at On status, the corresponding block will appear.
A/B: Indicates the active pad bank
Trigger Pads: When a pad is pressed, the corresponding block will appear.
Transport Controls: When a transport button is on, the corresponding block will appear.
Note: Port, Ch, Mode, Type and Val are settings of a component. When a component is activated, the
component name, operation data and setting information will be shown. If more than one compo-
nent is activated at the same time, the display shows the information of the component that was most
recently activated.
14