1-1. REAR BOARD REMOVAL
Eight Screws (KP-43T90)
Ten Screws (KP-48V90/53V90/61V90)
1-3. SERVICE POSITION
SECTION 1: DISASSEMBLY
on A board.
— 9 —
1-2. CHASSIS ASSEMBLY REMOVAL
From CG board CN1304.
(The extension cable is not
supplied because of the
countermeasure for radiation.)
Remove covers from chassis assembly
with pliers when checking printed circuit boards.
After checking, turn the covers over
and re-secure them with the screws.
KP- 43T90 / 48V90 / 53V90 / 61V90