Sony RA-3B Service Manual page 142

Using Your New Projection TV (continued)
Using the White Labeled Buttons for Projection TV Operations
Press repeatedly to scroll through available displays:
CC
XDS (Extended Data Service)
Displays a network name, program name, program type, program length,
program description, call letters and time of the show if the broadcaster
offers this service.
Caption Vision
Displayed on the screen if the broadcaster offers this service. (see
"Caption Vision" on page 34)
No display
"Off" appears and the display is canceled.
Press repeatedly until the projection TV displays the approximate time in
SLEEP
minutes (30, 60, or 90) that you want the projection TV to remain on before
shutting off automatically.
Cancel by pressing until "Sleep Off" appears.
Press to change between the VHF/UHF input and the AUX input. (for
ANT
detailed connection information, see "Cable and antenna" or "Cable box and
(AUX input)
cable" on page 9)
Note: You cannot view this input in PIP mode.
Press to scroll through the Multi-channel TV Sound (MTS) options:
MTS/SAP
Stereo, SAP, Mono and Auto SAP. (see "MTS/SAP" on page 27)
Press to select an audio option:
Simulated, Surround, BBE and Effect Off. (see "Effect" on page 27)
Press when you are finished using a VCR and you want to switch to the TV
TV/VTR
input. The VCR power will remain on.
SYSTEM OFF Press to turn off the projection TV and all other Sony equipment.
22
REFER TO THE
ILLUSTRATION OF THE
REMOTE CONTROL ON THE
INSIDE FRONT COVER OF
THIS MANUAL AS YOU
REVIEW THIS CHART