Advertisement
baCk View
On/Off/Charge switch
1. Connect the Mobile Speaker
System to your sound source
using the included cable or connector.
2. Set the Power switch on the back of the Speaker to On (the center position). The
Power LED on the front of the Speaker lights to indicate Play mode; and turns off to
indicate no sound (Mute) or charging.
3. To use the Mobile Speaker System as
an emergency power source for an
iPod or iPhone, connect the devices
and set the Power switch to Charge.
4. To use the resonator, press its cap
and rotate it counterclockwise so you
can expand the diaphragm. After use,
compress the diaphragm and turn the
cap clockwise to lock the resonator in place.
General
• Frequency response (amp):
280 Hz – 16 kHz
• Frequency response (speaker):
330 Hz – 18 kHz
• Signal to noise ratio (S/N):
≥ 80 dB
• Total harmonic distortion (THD):
≤1%
• Power output: 1.7 W
• Diameter, driver: 3.6 cm (1.4 in.)
inStRUctionS
Volume control
Power
LED
Speaker
USB connector
SpecificationS
ConneCtions
• iPhone/iPod connector
• USB mini B-type (audio/charging)
Cable
• 3.5 mm stereo / USB type-A
male to USB mini B male
• Length: 75 cm (29.5 in.)
Power
• Battery: lithium, 300 mAh
• Working time: 6 hours
Front View
iPhone/iPod connector
siDe View
Mini-USB port
(for audio &
charging)
Mini-USB port
& connector (for
audio & charging)
• Full recharge time: 5 hours
• Volume control, LED indicator
and on/off/charge switch
PhysiCal
• Dimensions: 60 x 46 x 27 mm
(2.3 x 1.8 x 1 in.)
• Weight: 50 g (1.76 oz.)
PaCkaGe Contents
• Mobile Speaker System
• Travel bag, cable, user manual
Retractable
resonator
(expanded)
Resonator
cap
3.5 mm stereo
connector
Advertisement
