Thank you for purchasing the MANHATTAN 5100 Series 5.1 Multimedia ® Speaker System, Model 150514. The easy-to-follow installation instructions in this manual will soon have you enjoying the benefits of these popular features: • Full-range speakers deliver rich, powerful sound •...
Page 3
Setup/connectionS 1. Carefully unpack the speakers and accessories. Do not lift or remove the speakers from the box by the function knobs or attached cords and cables, as this may damage the speaker unit. 2. Place the satellite speakers and subwoofer in the desired listening location.
Page 4
4. Using the included RCA cable, connect the input jacks on the rear panel of the subwoofer unit (above image, top) to the corresponding line out or audio output jack(s) of the audio source (stereo tuner, computer, game system or whatever). 5.
Page 5
MUTE STANDBY VIRTUAL 5.1 5.1 CHANNEL MUTE BASS+ BASS– SOURCE VOL+ VOL– MODE –DOWN/UP+ Mute button: Press to mute the sound (the Mute LED will blink); press again to restore the sound. Source button: Pressing this toggles between the Virtual 5.1 and 5.1 Channel settings.
Remote Control Standby: Press to either place the system in standby mode or remove it from standby mode. Mute: Press to mute the sound; press again to restore the sound. Reset: Press to restore all settings to the original factory settings. Source: Press to toggle between the Virtual 5.1 and 5.1 Channel settings.
SpecificationS General • RMS output power: 25 W + 10 W x 5 • Frequency response: subwoofer, 30 – 150 Hz; satellite, 100 Hz – 20 • Signal-to-noise ratio (S/N): ≥68 dB • Total harmonic distortion (THD): 0.1% at 1 W •...
Need help?
Do you have a question about the 150514 and is the answer not in the manual?
Questions and answers