Thank you for purchasing the MANHATTAN 2800 Acoustic Series ® Bluetooth Bookshelf Speaker System, Model 150194. The easy-to-follow installation instructions in this manual will soon have you enjoying the benefits of these popular features: • Two-way speakers deliver rich, powerful sound •...
Page 4
setup/connections unit A unit B 3.5” stereo cable note: this is used to connect the speakers to an audio source only if Bluetooth is not being used. Ac power rcA cable cord 1. Carefully unpack the speakers. Do not lift or remove the speakers from the box by the function knobs or attached cords and cables, as this may damage the speaker unit.
Page 5
Bluetooth pAiring/setup for ivt softwAre The following “pairing” procedure — making the Bluetooth Bookshelf Speaker System compatible with whatever Bluetooth-enabled audio source is to be used in conjunction with it — is only required the first time you set up your speaker system. Subsequent use only requires that you rotate the knob on the rear panel of unit A clockwise to turn the speakers on.
Page 6
2. On the front of the unit A speaker (within the Bluetooth “control panel” at the bottom), press and hold in the left button until the red and blue LEDs begin to flash (3 to 5 seconds). The blue Bluetooth Control Panel LED represents the status of the Bluetooth system;...
specificAtions Standards and Certifications • CE • Bluetooth V1.2 General • RMS power 5 W x 2 • Frequency response: 150 Hz – 20 kHz • Signal-to-noise ratio (S/N): <75 dB • Total harmonic distortion (THD): ≤0.1% • Impedance: 4 Ohms •...
Need help?
Do you have a question about the 150194 and is the answer not in the manual?
Questions and answers