Summary of Contents for FLOWMAX Technologies FLOWMAX-90
Page 1
User Manual for model FLOWMAX-90 Condensing water heater 85,000 BTU WARNING If the information in these instructions is not followed exactly, a fire or explosion may result, causing property damage, personal injury or death. -Do not store or use gasoline or other flammable vapours and liquids in the vicinity of this or any other appliance.
USER INSTRUCTIONS WATER HEATER OPERATING INSTRUCTIONS Make sure that the authorized technician who tested the water heater has stamped the guarantee booklet. The installation, first start-up, regulation and maintenance operations must be carried out exclusively by qualified personnel (e.g. FLOWMAX authorized Service Centres). Incorrect installation can cause damage to property and injury to persons or animals, for which the manufacturer will not be held responsible.
USER INSTRUCTIONS If you smell gas.… DO NOT ACTIVATE ANY ELECTRIC SWITCHES, TELEPHONES OR ANY OTHER DEVICE THAT MAY GENERATE ELECTRICAL DISCHARGES OR SPARKS. OPEN DOORS AND WINDOWS IMMEDIATELY TO CREATE A CURRENT OF AIR THAT WILL RAPIDLY CLEAR THE ROOM. CLOSE ALL GAS TAPS AND VALVES.
USER INSTRUCTIONS Starting - up the water heater Open the gas Isolation valve located under the • water heater. Switch on the water heater by placing the ON/OFF • switch (1) in the ON position (see “Control panel”). The water heater will light automatically (with the •...
USER INSTRUCTIONS D.H.W temperature control ■ The domestic hot water temperature is regulated by knob 3 (see “Control panel”). Rotating the knob anticlockwise reduces the • temperature. Rotating knob clockwise increases • temperature. The range of temperature settings for the domestic •...
Page 11
USER INSTRUCTIONS _E05_ Heating Sensor malfunction Code E05 lit continuously on the display. Call the Service Centre. _E06_ D.H.W Sensor malfunction Code E06 lit continuously on the display. Call the Service Centre. _E16_ Electric Fan Malfunction Code E16 lit continuously on the display. Call the Service Centre. _E22_ Parameter programming request Code E22 lit continuously on the display.
Need help?
Do you have a question about the FLOWMAX-90 and is the answer not in the manual?
Questions and answers