Table of Contents
Advertisement
CBA750B | USER MANUAL Firmware version 5.0
CRADLEPOINT
8.5 SNMP Configuration
SNMP, or Simple Network Management
Protocol, is an Internet standard protocol
for remote management. You might use
this instead of CradlePoint Enterprise
Cloud Manager if you want to remotely
manage a set of routers that include both
CradlePoint and non-CradlePoint
products.
Enable SNMP: Selecting "Enable SNMP"
will reveal the router's SNMP configuration
options.
Enable SNMP on LAN: Enabling SNMP
on LAN will make SNMP services
available on the LAN networks provided
by this router. SNMP will not be available
on guest or virtual networks that do not have administrative access.
LAN port #: Use the LAN port # field to configure the LAN port number you wish to access SNMP services on. (Default:
161)
Enable SNMP on WAN: Enabling SNMP on WAN will make SNMP services available to the WAN interfaces of the router.
WAN port #: Use the WAN port # field to configure which publicly accessible port you wish to make SNMP services
available on. (Default: 161)
SNMPv1: SNMP version 1 is the most basic version of SNMP. SNMPv1 will configure the router to transmit with settings
compatible with SNMP version 1 protocols.
SNMPv2c: SNMP version 2c has the same features as v1 with some additional commands. SNMPv2c will configure the
router to use settings and data formatting compatible with SNMP version 2c.
© 2013 CRADLEPOINT, INC.
PLEASE VISIT
HTTP://KNOWLEDGEBASE.CRADLEPOINT.COM/
FOR MORE HELP AND RESOURCES
PAGE 147
Advertisement
Table of Contents
