Table of Contents
Advertisement
CBA750B | USER MANUAL Firmware version 5.0
CRADLEPOINT
SMS Commands
Below is a list of supported SMS messages and the syntax format.
Due to security concerns, the set of commands are intentionally limited to those that can configure a modem's connection,
but cannot lock the administrator out due to malicious modem changes. Therefore, if an unsolicited request adjusts the
modem's configuration via SMS, an administrator can still access the modem via SMS.
Command syntax: <password>,<command>,[arg1,][arg2,]
All commands start with the password – either the default of the last 8 digits of the router's MAC address or the
administrator-configured password. Commands can have an optional number of arguments.
NOTE: The trailing comma on the command is important to allow the SMS engine to distinguish the final argument from other information the SMS
client might append to the message without your knowledge.
Supported Commands:
reboot: Reboot the router (not the modem)
• Syntax: <password>,reboot,
• Example: 1234,reboot,
restore: Restore the router to factory defaults
• Syntax: <password>,restore,
• Example: 1234,restore,
rstatus: Get router status
• Syntax: <password>,rstatus,
• Example: 1234,rstatus,
© 2013 CRADLEPOINT, INC.
PLEASE VISIT
HTTP://KNOWLEDGEBASE.CRADLEPOINT.COM/
FOR MORE HELP AND RESOURCES
PAGE 135
Advertisement
Table of Contents
