JVC KW-XG506 Instructions Manual page 25

Symptom
• The iPod or D. player does not turn on or does
not work.
• The sound is distorted.
• "NO IPOD" or "NO DP" appears on the display. • Check the connecting cable and its connection.
• Playback stops.
• No sound can be heard when connecting an
iPod nano.
• No sound can be heard.
• "ERROR 01" appears on the display when
connecting a D. player.
• "NO FILES" or "NO TRACK" appears on the
display.
• "RESET 1" – "RESET 7" appears on the display. Disconnect the adapter from both this unit and iPod/
• "RESET 8" appears on the display.
• The iPod's or D. player's controls do not work
after disconnecting from this unit.
• Microsoft and Windows Media are either registered trademarks or trademarks of Microsoft Corporation in the
United States and/or other countries.
• iPod is a trademark of Apple Inc., registered in the U.S. and other countries.
Remedy/Cause
• Check the connecting cable and its connection.
• Charge the battery.
• Update the firmware version.
Deactivate the equalizer either on this unit or the
iPod/D. player.
• Charge the battery.
The headphones are disconnected during playback.
Restart the playback operation (see page 13 ).
• Disconnect the headphones from the iPod nano.
• Update the firmware version of the iPod nano.
Disconnect the adapter from the D. player. Then, connect
it again.
No tracks are stored. Import tracks to the iPod or D. player.
D. player. Then, connect it again.
Check the connection between the adapter and this unit.
Reset the iPod or D. player.
REFERENCES 25