Installing The Usb Driver - TRIGEM LI545 User Manual

Installing the USB Driver

Installing the USB Driver
Installing the USB Driver Installing the USB Driver Installing the USB Driver
5-2
Your motherboard has two USB ports. USB is the next generation of peripheral
interface design. USB allows easy attachment of peripherals to your system.
Note Note
Note Note Note
It is recommended that prior to running Usbsupp to install the USB driver,
remove the PCI Universal Serial Bus entries (if any) in the Other Devices of
the Device Manager from the Control Panel.
The USB driver is included in your Windows 95 CD.
Note Note Note Note Note
To install from your Windows 95 CD, be sure your Windows95 CD is OSR2
with USB support version. (See on the surface of Windows 95 CD title.)
Follow these steps for USB driver installation.
1
Insert Windows 95 CD-ROM into CD-ROM drive.
2
Click the Start button, and then click Run.
3
Set the path to "D:\other\usb\usbsupp.exe" and click OK to install the
Microsoft USB Supplement to your system.
4
Click Yes, and then click Yes to accept the agreement.
5
Setup will scan your system. Click OK to complete setup when the installation
is finished. Setup will restart your system.
Update on Installing Windows 95