Updating Palettes Used In A Playback; Copying, Moving And Deleting Palettes; Copying Or Moving A Palette - Avolites Pearl Expert Titan Operator's Manual

Page 82 – 5. Palettes
added will be amended. Quick Merge will only update the attributes
stored in the original palette and ignore others (for example if you are
merging with a position palette, but have also modified the colour
attributes, the colour attributes would not be merged in).
When double clicking a palette button to update, the default option is
Quick Merge.
• You can set the console to "Always Merge" (so it doesn't ask
you) using option A of the User Settings (hold down the Avo
button to set these). You can also press the palette button a
second time to select the Merge option.
• You can add additional fixtures to a palette without affecting
existing ones. For example, if you have colour palettes for Mac
600s, you can add colours for your Mac 500s without affecting
any previously recorded values in the palette.
• You can remove attributes from palettes using the Off function,
see section 7.3.5 on page 125.
• When editing a palette the state of the programmer will be
preserved; when the modified palette is saved, your original
programmer contents will be restored and the programmer will
be left in the same state as when you started editing the
palette.
5.3.3

Updating palettes used in a playback

If you need to quickly update a palette during a show, for example
you fire a green cue and the Green palette used turns out to be not
quite the right colour, the Update function lets you automatically
update the palette used in the cue.
1> With the cue fired, select the fixtures and change them to the
settings you want to store (e.g. the right green colour).
2> Press Record Cue, [Update].
3> The cues and palettes which can be updated are shown on the
softkeys and all other buttons are greyed out.
4> Press the palette button (for example, Green) twice to update
that palette.
• You can also select multiple palettes to be updated by
highlighting them in the softkeys then pressing Enter to
confirm.
5.4

Copying, moving and deleting palettes

5.4.1

Copying or moving a palette

Using the Copy button you can make a copy of an existing palette or
move it to a new button. You can copy or move multiple palettes in
one operation. You cannot link palette buttons.
Move is useful for tidying up the console.
1> Press the Copy button.
2> Select [Copy] or [Move]. Pressing the Copy/Move/Link button
again will also toggle these options.
TitanUniversal_Man_v6-0_PE.doc 17 July 2012