Advertisement
�OM�A�T ��I�� �LAYBA�K
1.
Press the FUNCTION button
repeatedly until "CD" is
shown on display.
3.
Insert a disc with the label
side facing up.
4.
Close the CD door, the disc will rotate.
For CD : The total tracks of the disc will show on the
display.
For MP3/WMA/USB : The total tracks of the disc and
the total number of the folders will be shown on the
display.
TO INTE��U�T �LAYBA�K
Press the
again to resume playback.
For CD : Track number "001" & "CD" will be shown, the
time of the track "00:00" will flash, during normal
compact disc playback.
For MP3 : Track number "001" & "MP3" will be shown,
the time of the track "00:00" will flash, during
MP3 playback.
For WMA : Track number "001" & "WMA" will be shown,
the time of the track "00:00" will flash, during
WMA playback.
For USB : Track number "001" & "USB" will be shown,
the time of the track "00:00" will flash, during
USB playback.
CD display
WMA display
TO �KI� TO THE BEGINNING OF A T�A�K
•
Press either one of the skip buttons according to the desired skip direction.
•
Play/back resumes from the selected track.
•
When the button is pressed twice during playback, the previous track will start again.
•
When the button is pressed once during playback, the next track will be played.
�EA��HING FO� A �A��AGE WITHIN A T�A�K
•
Keep the or button pressed during playback, and release the button as soon as you
recognise the desired passage. Then the normal CD playback will resume from this point.
�LAYING T�A�K� IN �AN��OM O���E�
1. If the RANDOM / P - button is pressed, the tracks on the discs are not played
RANDOM / P - button is pressed, the tracks on the discs are not played
in consecutive order but in random order. The word RAND appears on the display to provide
a visual reminder that the RAND function has been activated.
2. Press the RANDOM / P - button to switch off the RAND function.
SCD-10 NO IPOD LENCO ENGLISH NO 5 5
FUNCTION
PLAY/PAUSE button. Press the button
MP3 display
USB display
is pressed, the tracks on the discs are not played
RANDOM / P - button to switch off the RAND function.
to switch off the RAND function.
2.
Lift the CD door up, by pressing at the right side of the
CD door.
CD display
5.
After disc reading is finished, the disc will be played
automatically. In stop mode, press the
PAUSE button to play the track.
For CD : Track number "001" & "CD" & "00:00" will be
shown, during normal compact disc playback.
For MP3 : Track number "F01" & "MP3" & "00:00" will
be shown, during MP3 playback.
For WMA : Track number "F01" & "WMA" & "00:00" will
be shown, during WMA playback.
For USB : Track number "F01" & "USB" & "00:00" will
be shown, during USB playback.
CD display
WMA display
TO �TO� �LAYBA�K
Press the
STOP button.
For CD : The total number of tracks and time will be shown.
For MP3 : The total number of tracks and folder will be shown.
For WMA : The total number of tracks and folder will be shown.
For USB : The total of tracks and folder will be shown.
GB 3
PLAY /
MP3 display
USB display
F - SKIP
B - SKIP
2011/11/2
11:05:13
Advertisement
