Do you have a question about the PA-81 and is the answer not in the manual?
Questions and answers
Hector Moaludi
May 28, 2025
It doesn't display well and fails play sd card and usb and
1 comments:
Mr. Anderson
May 28, 2025
Common issues with the LENCO PA-81 regarding display and playback of SD cards and USB drives may include:
1. Improper mode selection: The user must press the USB/SD mode button to switch correctly between USB and SD card playback. Failure to do so may result in no playback or incorrect source selection.
2. LED indicator confusion: The USB and SD LED indicators light up only when the corresponding media is plugged in and selected. If the LED does not light, the device may not detect the drive or the mode may not be selected.
3. Playback control: Users must use the correct buttons (e.g., PLAY/PAUSE, NEXT, PREVIOUS) and understand folder navigation using the TRACK/FOLDER control for proper operation. Misuse may lead to playback issues or difficulty navigating files.
4. Repeat and ID3 display: Misunderstanding the REPEAT and ID3 buttons may cause confusion during playback or while viewing track information.
These issues typically relate to user operation and correct use of panel controls.
- 12 hour playback time Overview The Lenco PA-81 is a Wireless PA System with an integrated 4-channel mixer which accepts a microphone, Line-in audio, stereo Bluetooth wireless audio up to 10 meters and also USB/SD card MP3 player with LCD display and control. Only few simple steps to pair your device!! The MDF wood and epoxy painting will stand the toughest outdoor conditions.
2. SAFETY INSTRUCTION CAUTION:This product satisfies FCC regulations when shielded cables and connectors are used to connect the unit to other equipment.To prevent electromagnetic inserter-ence with electric appliances such as radios and televisions. use shielded cables and connectors for connections The exclamation point within an equilateral triangle is Intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance...
Page 4
against voltage surges and built-up static charges. Article 810 of the National Electrical Code. ANSI/NFPA 65. provides Information with regard to proper grounding of the mast and supporting structure, grounding of the lead-in wire to an antenna discharge unit, size of grounding conductors, location of antenna-discharge unit, connection to grounding electrodes.
3. Panel Description 1. USB LED indicator: This LED indicator will be lightened when USB drive is plugged or USB mode is selected SD indicator button: This LED indicator will be lightened when SD card is plugged or SD mode is selected 3.
Page 6
(Search for “Lenco PA-81” on your device, enter “0000” if PIN is requested) Press/Hold 10sec: Turn off Bluetooth and all connection will be lost (Note: If no device is paired to PA-81 for 2min, Bluetooth will be turn OFF Only 1 device can be paired to PA-81 at a time) 17.
OFF Low-battery protection Power will be cut automatically when battery is too low to operat. User has to connect the PA-81 to AC source in order to cnarge and operate.Please do not leave the unit unused with a discharged battery inside.The battery ma...
(Local charges) The helpdesk is accessible from Monday till Friday from 9 AM till 6 PM. When contacting Lenco, you will always be asked for the model and serial number • of your product. The serial number can be found on the back of the device. Please...
Page 9
(both during and after the warranty period) you should contact your local dealer. Important note: It is not possible to send products that need repairs to Lenco directly. Important note: If this unit is opened or accessed by a non-official service center in any way, the warranty expires.
Need help?
Do you have a question about the PA-81 and is the answer not in the manual?
Questions and answers
It doesn't display well and fails play sd card and usb and
Common issues with the LENCO PA-81 regarding display and playback of SD cards and USB drives may include:
1. Improper mode selection: The user must press the USB/SD mode button to switch correctly between USB and SD card playback. Failure to do so may result in no playback or incorrect source selection.
2. LED indicator confusion: The USB and SD LED indicators light up only when the corresponding media is plugged in and selected. If the LED does not light, the device may not detect the drive or the mode may not be selected.
3. Playback control: Users must use the correct buttons (e.g., PLAY/PAUSE, NEXT, PREVIOUS) and understand folder navigation using the TRACK/FOLDER control for proper operation. Misuse may lead to playback issues or difficulty navigating files.
4. Repeat and ID3 display: Misunderstanding the REPEAT and ID3 buttons may cause confusion during playback or while viewing track information.
These issues typically relate to user operation and correct use of panel controls.
This answer is automatically generated