Rear Cross Path With Blind Spot Monitoring; Power Sliding Side Doors - Dodge Grand Caravan 2012 User Manual

OPERATING YOUR VEHICLE
Drivers must be careful when backing up even when using the ParkView
Back-Up Camera. Always check carefully behind your vehicle, and be sure to
check for pedestrians, animals, other vehicles, obstructions, or blind spots
before backing up. You must continue to pay attention while backing up.
Failure to do so can result in serious injury or death.
REAR CROSS PATH WITH BLIND SPOT
MONITORING
• The Blind Spot Monitoring (BSM) system uses two radar-based sensors, located
inside the rear bumper fascia, to detect Highway licensable vehicles (automobiles,
trucks, motorcycles etc.) that enter the blind spot zones from the rear/front/side of
the vehicle.
• The Blind Spot Monitoring (BSM) system warning light, located in the outside
mirrors, will illuminate if a vehicle moves into a blind spot zone.
• The BSM system can also be configured to sound an audible (chime) alert and
mute the radio to notify you of objects that have entered the detection zones.
• Refer to your owner's manual on the DVD for further details.

POWER SLIDING SIDE DOORS

Automatic/Manual Operation
• The power sliding door may be opened or closed manually or by using the buttons
on the Key Fob, overhead console switch, or rear door switch.
WARNING!
• Pulling the inside or outside power
sliding door handle will also power
open the power sliding doors.
NOTE: When the power sliding door master
lock switch is in the OFF position, the
power sliding side door may not be opened
or closed by pressing the switch located on
the b-pillar trim panel, just in front of the
sliding door or activating the inside power
sliding door handle.
® Rear
33