Flanders Scientific LM-0750W User Manual page 6

Parts & Their Functions

Bright/F.D./Ref Pos.: Used to adjust brightness higher or lower. Pressing down on the center of this button will
return the brightness setting to its default position. When Measurement function is on, press to enable find delta
feature.

Chroma / V Pos: Used to adjust chroma higher or lower. Pressing down on the center of this button will return
the chroma setting to its default position. Used to move crosshair vertically within Measurement function.

Phase / H Pos: Used to adjust phase. Pressing down on the center of this button will return the phase setting to
its default position. Use to move crosshair horizontally within Measurement function.

Tally: Three color tally lamp controlled via remote control.
Rear
AC
DC
Power
Power

LAN: Inactive—Factory Use Only.

GPI: General Purpose Interface for Contact Closure Remote Control.
Remote Control Functions can be assigned from Monitor Main Menu.

RS-485: RS-485 Ports (In/Out) for looping remote control interface.

DVI-I: DVI-I Input. Supports both DVI-Analog & DVI-Digital.
Digital Toggle is found within On Screen Menu.

Video In/Out: Composite Video Input & Loop Through.

Component In/Out: Component Video (SD & HD autosensing) Input &
Loop Through. Supports both YPbPr & RGB signals.

Ext. Sync. In/Out: External Reference Synchronization Interface.

SDI In 1 & SDI In 2: Two Autosensing, Autoswitching, Multi-Format HD/SD-
SDI Inputs. Both Inputs support SD or HD SDI Signals, & 3Gbps if installed

SDI Out 1 & Out 2: Two mirrored SD/HD-SDI Outputs (& 3Gbps if in-
stalled). Please note that both Outputs pass through the identical active
SDI channel, not two distinct channels.

Audio In/Out: Analog Stereo Mini-phono Audio Input & Output.
Analog/
6
Back to Table of Contents
© 2011 Flanders Scientific, Inc.