Camera Mounting - Panasonic WV-NP304 Installation Manual

Camera mounting

Mount the camera onto an optional camera mount bracket and attach the safety wire.
Important:
• Make sure that the installing place is strong enough to support the total weight of the cam-
era and the camera mount bracket.
• Installing the camera mount bracket on the foundation part of the building or equivalent
strong part.
• Do not use wood screws to fix the camera mount bracket (option) since they are not strong
enough to support the weight of the camera and the bracket.
z
Fix an optional camera mount bracket onto the desired place and mount the camera on it.
Use appropriate screws for the ceiling/wall material to secure an optional camera mount
bracket. Method of installation may be different depending on the material of the place
where the camera mount bracket is to be installed.
• When installing on steel:
• When installing on concrete: Fix with anchor bolts (M6 or M8)
• The following are the requirements of the camera mount bracket installation:
Installing place
On ceiling
On wall
Important:
• When installing
bracket on wall, installation height of the
camera mount bracket shall be as indi-
cated in the following illustrations.
Fix with bolts and nuts (M6 or M8)
Appropriate cam-
era mount bracket
WV-7010A
WV-831
the camera mount
Recommended Number of
screw
M6 or M8
M8
Pull-out capacity
screw of a single screw
196 N {20 kgf}
3 pcs.
921 N {94 kgf}
4 pcs.
More than 270 cm
Floor
21